When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have done the Crown Vic swap on my 68, and im putting a offset four link with airbags on back. Im having problems finding any company that offers airbags for the front set-up. I was just wondering if any other people who have done the swap have been able to find anything that woud work.
Well I would doubt You will find a spring made for the CV.
I did see in the last Speedway catalog #302 on page 259 Ridetech
has the Black series that could be adapted without a lot of work.
Just $600pr is still high for Me.
You will have to build your own cups out of 3 or 4" round tube.
Not that hard to do.
The bottom will have to be some sort of bolt on braket because of the aluminum arms.
Thanks for the info, I figured I would have build some custom mounts, but I thought someone could give me a idea on what type or where they have purchased the bags. I figure some has experimented and found a size of bag that would work and save me some time and money.