Ford Truck Enthusiasts Forums
The Mod came with two black zip ties. I didn't use them. I decided to use 10lb velcro. The guy that makes them recommended this. Over all I think this is a improvement over zip ties.
The Mod came with two black zip ties. I didn't use them. I decided to use 10lb velcro. The guy that makes them recommended this. Over all I think this is a improvement over zip ties.
0 2017/08/24 20:23:12
I mounted the Module on top of the fuse box. It was recommended by the rep that I communicated with. Away from heat.
I mounted the Module on top of the fuse box. It was recommended by the rep that I communicated with. Away from heat.
0 2017/08/24 20:27:03
Feeding the wire through the fire wall took the longest. If you youtube how to pass wires through a 2011 f250 theres a guy that shows you where to access. Not very hard. All you have to do is pull up the carpet and pull the rubber plug. A trick that I used was that I drilled a hole into the plug and fed the selector out of the hole. I tied wire to it and pulled it up next to the fuse box. I did this so I didn't have to drill a larger hole for the selector.
Feeding the wire through the fire wall took the longest. If you youtube how to pass wires through a 2011 f250 theres a guy that shows you where to access. Not very hard. All you have to do is pull up the carpet and pull the rubber plug. A trick that I used was that I drilled a hole into the plug and fed the selector out of the hole. I tied wire to it and pulled it up next to the fuse box. I did this so I didn't have to drill a larger hole for the selector.
0 2017/08/24 20:28:32
0 2017/08/24 20:41:27
0 2017/08/24 20:42:00
This is the switch that came with the mod. I found a hallow spot above the parking park the install. I drilled a 11/32 hole *i think* it was a perfect fit. I pulled the side panel to the door and below the steering wheel to access. After I installed I took a couple of zip ties to hold the wire in place
This is the switch that came with the mod. I found a hallow spot above the parking park the install. I drilled a 11/32 hole *i think* it was a perfect fit. I pulled the side panel to the door and below the steering wheel to access. After I installed I took a couple of zip ties to hold the wire in place
0 2017/08/24 20:42:26
0 2017/08/24 20:45:37
This switch was too big to fit through the plastic plug so I drilled a hole and back fed this thing through the fire wall. NO big deal. Just tape and string.
This switch was too big to fit through the plastic plug so I drilled a hole and back fed this thing through the fire wall. NO big deal. Just tape and string.
0 2017/08/24 20:46:02
0 2017/08/24 20:47:50
0 2017/09/09 13:54:49
0 2017/10/07 19:13:56
0 2017/10/17 18:03:34
0 2017/10/17 18:03:41
0 2017/10/17 18:04:07
0 2017/10/22 13:45:32
This is the brand i went with. Not too bad as far as price. I bought them on eBay
This is the brand i went with. Not too bad as far as price. I bought them on eBay
0 2017/12/18 18:39:14
reg bulbs
reg bulbs
0 2017/12/18 18:39:20
grill off
grill off
0 2017/12/18 18:40:18
low beam
low beam
0 2017/12/18 18:40:24
high beam
high beam
0 2017/12/18 18:40:29
0 2017/12/18 18:58:49
This is the second time my motor craft filter has leaked. I haven't noticed any spots on my drive way but I think ill be trying something other than motor craft. I wiped it off and ill check it in a couple of days.
This is the second time my motor craft filter has leaked. I haven't noticed any spots on my drive way but I think ill be trying something other than motor craft. I wiped it off and ill check it in a couple of days.
0 2017/12/18 19:02:07
0 2018/03/24 12:41:53
0 2018/03/24 12:41:58
0 2018/03/24 12:41:59
0 2018/03/24 12:41:59
0 2018/03/24 12:42:00
0 2018/03/24 12:42:00
0 2018/03/24 12:42:02
0 2018/03/24 12:42:02
0 2018/03/24 12:42:04
0 2018/03/24 12:42:07
0 2018/03/24 12:42:07
0 2018/03/24 12:42:07
0 2018/03/24 12:42:08
0 2018/03/24 12:42:08
0 2018/03/24 12:42:08
0 2018/03/24 12:42:08
0 2018/04/22 07:10:30
0 2018/04/22 07:10:42