Notices

Older, Classic & Antique Trucks / 1961 - 1966 F-100 & Larger F-Series Trucks    Today 03:24 AM

rusty valley
Nice old truck, I'm very happy to see a young fella excited to own an old pickup. Many of us here are near "toes up" , so we rely on you younguns to pass the torch. You've come to the right place,...
Well said Rusty.

0 Reply
charlie g's Avatar
charlie g
Thread Starter

Mid-Atlantic Region / New Jersey Chapter    Today 03:20 AM

our crosstrek also ken, that eyesite thing is HUGE. not so big on the frontier but still there , insurance we pay the premium to keep the deductable at $100.00 and it sure paid off this time . ...

0 Reply

Older, Classic & Antique Trucks / 1948 - 1956 F1, F100 & Larger F-Series Trucks    Today 03:14 AM

CrossRam36
I'll give 225/70R19.5 a try. Thanks!
Be aware that others have reported that there may be an issue with the spacing between the dual tires. It seems that the 8R19.5 have lesser of a footprint than the 225/70R19.5. While some say that...

0 Reply

Ford Vans and other vehicles / 1968-Present E-Series Van/Cutaway/Chassis    Today 03:02 AM

manicmechanic007
ProBit makes a decent spot weld drill bit in 10mm diameter Drilled out hundreds of spot welds setting the caster/ camber on Taurus and Sable vehicles back in the mid 90s The bits are hell to...
I had a spotweld removal bit when I had to replace the bedside on my F150, burned it up rather quick, oh so many spot welds.

0 Reply

Ford Vans and other vehicles / 1968-Present E-Series Van/Cutaway/Chassis    Today 02:59 AM

Get the van on a lift and look under it, my E350 developed a knot on the sidewall on the backside.

0 Reply
maples01's Avatar
maples01
Thread Starter

Ford Vans and other vehicles / 1968-Present E-Series Van/Cutaway/Chassis    Today 02:55 AM

Just curious if the alternator bracket is the same, I believe they are but can't be certain, the money pit is discharging when hot, just takes 5 minutes before it drops voltage, I'm sick of it, I...

0 Reply
Mike6024's Avatar
Mike6024
Thread Starter

Super Duty/Heavy Duty / Large Truck    Today 02:51 AM

The oil pan is back on, filled with fresh oil. No more sludge and water mixed with oil in it. Have not started it yet but have cranked it over with the spark plugs removed. So far so good.

0 Reply
jodly58's Avatar
jodly58
Thread Starter

Super Duty/Heavy Duty / 1999 - 2016 Super Duty    Today 02:31 AM

would any of you td of that have wrestled with the front hub bearings' ,have a recommendation on a good brand of the snap ring pliers needed for removal? I bought a set from the jungle site made just...

0 Reply
Papa Tiger's Avatar
Papa Tiger
Thread Starter

General / General NON-Automotive Conversation    Today 02:30 AM

https://youtu.be/OSFf1WaohOU?t=4

0 Reply

General / General NON-Automotive Conversation    Today 02:18 AM

I did'st realize ditz was a topic! https://youtu.be/bqgA48WNH88?t=3

0 Reply

All times are GMT -5. The time now is 03:26 AM.