73-79 parts available - 1975 parts truck in Atlanta
#1
73-79 parts available - 1975 parts truck in Atlanta
Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): Prelude
Item Condition: GA
Engine: Part suitable for gas truck
100 trans, c6 auto (removed)
50 hood, has a few dents on top but fits well (removed)
SOLD 300 bed, solid, short bed
SOLD 150 tailgate, very solid and straight, with XLT trim (removed)
75 headliner trim ring, 4pcs, will clean up very nice (removed)
50 a/c, misc parts, compressor, condenser for air conditioning (removed)
125 power steering parts for conversion on a non-power steering truck.
Sale pending 200 3.00 9" rear end
150 both bumpers (100 front/50 rear) (removed)
50 bumper guards (removed)
65 hvac control, for heat and air (removed)
SOLD 150 grille, complete, inserts, red XLT emblem, FORD lettering, will polish up really nice (removed)
30 hubcaps (removed)
20 Neutral safety switch, mounts on steering column (removed)
20 turn signal switch, w/hazard switch (removed)
20 steering column
SOLD 100 dentside middle exterior trim, all pieces, will polish up nice (removed)
SOLD 15 lower exterior trim, missing LR piece & doors
SOLD 25 fender molding (wheel arch)
50 window chrome trim (windshield) (removed)
10 spare tire mount (under bed)
50 inner fenders
40 gauge cluster from dash, XLT (removed)
125 radiator support (removed)
200 cab w/glass
40 driveshaft (removed)
SOLD 25 bedrails
SOLD 100 doors/ea
SOLD 75 fenders/ea (removed)
75 perches with mounts for FE engine swap
20 seat frame, foam and cover are included but worn badly (removed)
25 ventshades, side window shades, chrome (removed)
SOLD 20 side mirrors, sport small style (removed)
10 wiper arms, pair (removed)
SOLD 10 ip surround, wood grain XLT (removed)
SOLD 20 headlight switch with pigtail (removed)
SOLD 10 wiper switch with pigtail (removed)
SOLD 30 door panels and headliner, custom wrap and material included (removed)
SOLD 20 Jack
SOLD 20 glove box door XLT
-------------------------------------------------------
I am going to do the disc/power brake swap on my bump, so I just picked up a 1975 2wd F100 SB XLT w/air, C6, 3.00 rear, and power steering for a parts truck.
The front brakes/suspension, rear springs, cargo light, radiator, and wheels are spoken for. The engine is pretty much reduced to a 360 block, crank, heads, etc with misc parts.
Lights, tailgate, bed (seems solid), doors, fenders, hood (has small dents), cab (roof is dented, floor is decent), bumpers, dash, a/c, headliner trim, dent side trim, lower side trim, window trim, window shade trim, wheel arch trim, grille with red XLT, side XLT badges, power steering, neutral safety switch, turn signal switch, hvac controls, column, fenders, radiator support, driveshaft and diff are all available, to name just a few things.
Not planning to ship anything unless it's small, so for the big stuff this is going to be a pick-n-pull type setup for my Atlanta friends. I do travel around the SE a few times a month so meeting somewhere may be possible.
#6
Bumper brackets - yep I can sell those. Make me an offer.
Tailgate trim - at this time I'd rather sell the tailgate as a whole...it's in great shape (needs new paint and it will be like new) and parting it out doesn't make sense for the person that buys the tailgate. Tailgate $125 with all the trim and hardware - too big to ship though.
Tailgate trim - at this time I'd rather sell the tailgate as a whole...it's in great shape (needs new paint and it will be like new) and parting it out doesn't make sense for the person that buys the tailgate. Tailgate $125 with all the trim and hardware - too big to ship though.
Trending Topics
#12
How about $125.00 shipped to 10536?
That should cover a flat rate box from the post office and Still get you $100.00 for them.
My email is garyv350@hotmail.com.
You can email me a cell number and we can figure out what works easier.
Thanks
That should cover a flat rate box from the post office and Still get you $100.00 for them.
My email is garyv350@hotmail.com.
You can email me a cell number and we can figure out what works easier.
Thanks
#13
email sent
How about $125.00 shipped to 10536?
That should cover a flat rate box from the post office and Still get you $100.00 for them.
My email is garyv350@hotmail.com.
You can email me a cell number and we can figure out what works easier.
Thanks
That should cover a flat rate box from the post office and Still get you $100.00 for them.
My email is garyv350@hotmail.com.
You can email me a cell number and we can figure out what works easier.
Thanks
#14
OK that p/n is just for the connector - do you want the entire harness or just a pigtail with the connector? I was hoping to find a pic of it so I could see how much wiring needs to be taken out from the connector back but a search came up empty. Please let me know what exactly you need. Thanks.
#15
I would like the pigtail with connector, just need enough wire to splice into my harness. It would probably be a large hassle for you to pull the harness, but if not I'd take it. What about the ignition switch, bezel, and pigtail with connector? How much?