Oil pump & Oil Pan?
Thread Starter
|
Senior User
Joined: Sep 2002
Posts: 117
Likes: 0
From: dearborn heights U.S
Oil pump & Oil Pan?
Let me start over,, i forgot to list that i m looking for high volume oil pump for my 429 plus i m coverting it to a 4x4 , 429 engine year i think 73 and i already have a car oil pump but the 4x4 pick up tube wont bolt on right cuz mounting plate re different.. my oil pump i have now part # is M84bhv-s so what u think i should do ? does 80's engine of 460 have oil pumps at the same place as 73' oil pump? both part number are slightly different are they extactly the same ? i m gonna try auto store but they dont have it on hands they had to order some which sucks !!!! your help will be much pleased!! thajks JB
Posting Guru
Joined: Sep 1999
Posts: 2,297
Likes: 1
From: Indiana
Oil pump & Oil Pan?
The first question is, what do you have oil pan wise, so far?
You are going to need a rear sump oil pan and oil pump pickup to match. The car, oil pump pickup should be for a front sump pan.
The oil pump you will need will be for a 460 from a full size van or a 83 - up 460 in a truck, as these will accommodate a rear sump oil pan and the pickup tube, which by the way fastens to the oil pump with two bolts. And yes, I believe the oil pumps mount in the same location on both engines.
You are going to need a rear sump oil pan and oil pump pickup to match. The car, oil pump pickup should be for a front sump pan.
The oil pump you will need will be for a 460 from a full size van or a 83 - up 460 in a truck, as these will accommodate a rear sump oil pan and the pickup tube, which by the way fastens to the oil pump with two bolts. And yes, I believe the oil pumps mount in the same location on both engines.
Last edited by Superdave; Apr 2, 2003 at 10:46 PM.
Thread Starter
|
Senior User
Joined: Sep 2002
Posts: 117
Likes: 0
From: dearborn heights U.S
Oil pump & Oil Pan?
yeah super dave , hi again!!!!!!!!! yeah i got rear sump oil pan fromEbay and i figured it out yeah i got a hi vol pump from 83 4x4 pick up so i already had the oil pump and pan on so i already installed motor on frame since u gave me the mounts imagaine how long i have waited cuz things were messy through out winters ... thanks also wanted to know if u use gasket between the transfercase to the transmission and what do u call that gasket? i need one before i can adapt bother back together
Posting Guru
Joined: Sep 1999
Posts: 2,297
Likes: 1
From: Indiana
Oil pump & Oil Pan?
crazy4Fords, Glad to see your still out there. I wondered how your project was going. I hear that about the winter. I could only imagine what it must have been like up there. We seldom get over 10" - 12" of snow for the whole winter. Had more than twice that this winter.
So you are lined out on your oil pan, sump and oil pump?
I'm not quite sure about the gasket for the piece you are talking about. I think it is just called an adapter that goes between the transfercase and transmission. I am not sure if it has an actual gasket, big o-ring type seal or silicone. Someone on here will know.
Take care.
So you are lined out on your oil pan, sump and oil pump?
I'm not quite sure about the gasket for the piece you are talking about. I think it is just called an adapter that goes between the transfercase and transmission. I am not sure if it has an actual gasket, big o-ring type seal or silicone. Someone on here will know.
Take care.
Thread
Thread Starter
Forum
Replies
Last Post
Annihilator
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
9
Nov 10, 2004 08:34 PM
1972 Ford Thunderbird 429 V8
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
13
Apr 13, 2003 09:07 PM
forddude72
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
Jan 9, 2002 11:20 AM
