When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Made a new battery box to get the weight down low and closer to the rear of the truck.
Used 3/16th steel for the back and bottom. 16g for the sides and 22g for the cover.
and finally the last of the frame welding. Added some tie down holes. Grabbed the oval plates from some modern donor sheet metal. This will make strapping it down on a trailer much easier.
media blasted the whole thing. Painted with kbc chassis black.
