I cut my f3 down to f1 but what is the exact measurement from center of axle to rear of frame?i tried searching but cant find info.thanks

 

The only dimension is 39.33" from the centerline of the axle to the back of the bed on the F1. I don't see the dimension to the back of the frame and I can't measure mine as I have modified it. Good luck

 

This shows your measurement, 35.81". Stu

 

thank you!!!!!

 

you got one of these diagrams for the F3?

 

No. The F-1 diagram is online and from one of the 1948-1950 Ford Body Builders' Layout Books. . I find no online diagram for an F-2 or F-3, but did find the F-4 diagram. I have the 1953 and two later full copies of the books but so far haven't found any earlier versions. Stu

 

Following.