When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm needing a front end alignment, so its probably a good time to get a set of shocks for the frontend. The rear's are fine, the front's are pretty well shot . Anybody had good results with a particular brand and type? This is more of a driver, not a hotrod. I'd like a nice ride with the ability to take the curves at the recomended speeds.
One of the parts vendors was advertising OEM shocks, NPD is listing gas Gabriels (I think) at what seems like a decent price. And of course theres always NAPA and Pep Boys weekly sales.
Somebody once told me to put the biggest bore shocks on I could find. I don't really think the $20+ shocks differ much in this respect, so I went with some $20 Gabriels and have no complaints.
I drove my '72 a lot of miles before replacing old shocks with Gabriels. Still would bottom out on a bad bump when 4 wheeling. Pulled the old springs and dropped in a set of progressive springs. Big diff on rough ground. THEN I had it aligned. Next is the rear leafs.
Did you get shocks made for trucks, or cars that are car/truck shocks? Some places are telling me I can get them as cheap as 13-14 dollars, but they sound like car shocks. I think that may be a little to light duty. What type Gabriels are you using?