Description:

I have a couple 1961-62  4WD trucks and boxes of parts, new parts, NOS,  and sheet-metal that I need to downsize and make available to someone that likes these early 60’s 4x4’s. 

1962  cab  has had corners, cowls, steps, rockers replaced. 

The late 61  cab has had corners replaced.  floor has pitting. 

Both have solid A-pillars, and drip rails and roof lines above doors. The cabs have been welded, repaired and are solid. 

Both frames have new shocks and new exhaust systems, Ford 9" rear ends.   

The late 62 has a very nice running 300-6 with Duraspark distributor, wires, electronic ignition, never used.  New carb.  NP435. 

The late 61 has a stuck FE.  Can't tell if it a 352, 360. T18 4 speed.  

Tons of parts, new, NOS, and used what came with them.  Invested some money in fab work and parts.  Both are missing the rear drive main driveshafts, but complete front 4wd differentials, steering geometry and drive lines are there.  Also included is a Dana 3/4 ton rear axle and driveshaft that will fit to these  that I pulled from a 1965 F100 4WD.  

Reupholstered bench seat in beige never sat in, two brand new ACC carpets in the boxes, correct 4WD steering wheels,  These are projects, the late 61 was purchased as a parts truck.  I can part out and make more but choose not to part out. These are fantastic starts to build complete and correct early 60's 4WD f100’s for the trail, plowing, show or street.  Best to call and talk after a PM.  Photos on request.  Please no rude and demanding notes and messages. This is a hobby, after-all.

I'm located in New Hampshire. Cash preferred, and best offer, can sell separately or together.  No small monthly payment plans. Both have titles and bill of sales.