Notices
1987 - 1996 F150 & Larger F-Series Trucks 1987 - 1996 Ford F-150, F-250, F-350 and larger pickups - including the 1997 heavy-duty F250/F350+ trucks

Rear end gears

Thread Tools
 
Search this Thread
 
Old Mar 3, 2009 | 09:23 PM
  #1  
nnero's Avatar
nnero
Thread Starter
|
Elder User
Joined: May 2007
Posts: 523
Likes: 0
From: NY (not the city!!)
Rear end gears

I have heard many, many people complain about the 3.55 gears in trucks with the 4.9 and 5.0. What is involved with switching them and what should I switch them with 3.73s? Is this a costly project? I did a search and didnt seem to find much. Hope this question doesnt sound dumb. I dont know things like this but am trying to learn.
 
Reply
Old Mar 3, 2009 | 10:36 PM
  #2  
Conanski's Avatar
Conanski
FTE Legend
15 Year Member
Photogenic
Photoriffic
Community Builder
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
3.55 gears are fine in a 4.9 or 5.8 truck with tires up to about 30", and it's also a good overall ratio for the 460 trucks as long as it has overdrive. The 5.0 is the weakest motor in the stable in terms of TQ so it needs more gear, these trucks should have come from the factory with at least 3.73's IMO. If you have plans for bigger tires and have an OD tranny then jump right to 4.10. It's not cheap to have a shop change gears, I have seen quotes as high at $1500 for a 4x4. The parts themselves cost about $250 per axle and it is possible to do with basic hand tools if you're mechanically inclined, most places that sell gears will also sell a video of the install procedure.
 
Reply
Old Mar 3, 2009 | 11:35 PM
  #3  
TexasGuy001's Avatar
TexasGuy001
Hotshot
20 Year Member
Photogenic
Photoriffic
Liked
Joined: Sep 2001
Posts: 11,958
Likes: 228
I agree with Conanski.

Also, I wish my truck had 3.73.
 
Reply
Old Mar 4, 2009 | 09:56 AM
  #4  
str8dogg's Avatar
str8dogg
Cross-Country
15 Year Member
Joined: Jan 2009
Posts: 58
Likes: 0
I have 3.55 gears on my '89 302 / M5R2 and I am running 31's on 15" rims. I don't do much hauling, racing or other stress things with my truck and they are doing fine. If you decide to go above 31's, like mentioned earlier you will need to change out the gears, yo might as well go straight to the top with 4.10s.
 
Reply
Old Mar 4, 2009 | 10:06 AM
  #5  
lew52's Avatar
lew52
Postmaster
Joined: Jan 2009
Posts: 4,558
Likes: 2
Your gear selection should be made on what you use the truck for ..what you want out of it ...& most important tire size...
 
Reply
Old Mar 4, 2009 | 10:20 AM
  #6  
stangbanger's Avatar
stangbanger
Senior User
Joined: Dec 2007
Posts: 356
Likes: 0
35 bfg mudd terrains, 355 gears 302. And shes quite a turd! But i dont wheel her or go racing at this point and i def wont go wheeling until i upgrade! i can get into 5th gear on the highway but i am riding at 1500 to 2000 rpms. And the 302 just doesnt get into her power band so going up hills is a drop to 3rd gear!

What are the front gears i need for my TTB front end? Arent they special for the houseing?
 
Reply
Old Mar 4, 2009 | 10:54 AM
  #7  
nnero's Avatar
nnero
Thread Starter
|
Elder User
Joined: May 2007
Posts: 523
Likes: 0
From: NY (not the city!!)
Right now I have 31s and the truck is good enough for me. Eventually I will get another vehicle so I dont have drive my truck everyday. At this point I will go through the truck the way it should be done. Its very hard to do that with a daily driver. I plan on eventually having 33s. At that point in time, a gear swap will done. But this is in the future and keeping the truck going and not looking completely like crap is my main priority. Thanks everyone, I love this site so much. Why did 3.55s come with 5.0s in the first place? For gas mileage?
 
Reply
Old Mar 4, 2009 | 11:22 AM
  #8  
lew52's Avatar
lew52
Postmaster
Joined: Jan 2009
Posts: 4,558
Likes: 2
Mine came with 308s but it is 2wd....If you go to 33s 410 would be good you could even go 456 if you want.. Lew
 
Reply
FTE Stories

Ford Trucks for Ford Truck Enthusiasts

story-0

10 Ugly Ford Trucks That We Still Kinda Love

 Joe Kucinski
story-1

10 Things Every Truck Owner NEEDS (2026 Edition)

 Michael S. Palmer
story-2

Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath

 Verdad Gallardo
story-3

Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

 Joe Kucinski
story-4

2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

 Brett Foote
story-5

Top 10 Ford Truck Tragedies

 Joe Kucinski
story-6

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

 Brett Foote
story-7

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

 Michael S. Palmer
story-8

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

 Verdad Gallardo
story-9

10 Best Ford Truck Engines We Miss the Most!

 Joe Kucinski
Old Mar 4, 2009 | 12:14 PM
  #9  
1966Tbird's Avatar
1966Tbird
Posting Guru
Joined: Dec 2006
Posts: 1,639
Likes: 2
i just bought a set of 4.56 gears like an hour ago and i'm putting them in i got tired of my 3.73s and 33in tires i would recomend at least 4.10 gears with 33s............if you want to buy my 3.73s just pm me
 
Reply
Old Mar 4, 2009 | 03:38 PM
  #10  
Rulebreaker's Avatar
Rulebreaker
Senior User
Joined: Sep 2003
Posts: 467
Likes: 0
From: Manton,MI
Originally Posted by stangbanger
What are the front gears i need for my TTB front end? Arent they special for the houseing?
It's a HP Dana 44. Reverse cut gears are needed. RB
 
Reply
Old Mar 4, 2009 | 04:17 PM
  #11  
nnero's Avatar
nnero
Thread Starter
|
Elder User
Joined: May 2007
Posts: 523
Likes: 0
From: NY (not the city!!)
Tbird: as much as i would like to I do not have the extra money right now. I always get excited thinking about what my truck could be with just a little extra cash. Right now I will just concentrate keeping the truck reliable. Thanks for the offer.
 
Reply
Old Mar 4, 2009 | 05:12 PM
  #12  
1966Tbird's Avatar
1966Tbird
Posting Guru
Joined: Dec 2006
Posts: 1,639
Likes: 2
no problem if you ever change your mind they will probably be resting in my garrage for years to come just send me a pm
 
Reply
Old Mar 5, 2009 | 12:10 AM
  #13  
stangbanger's Avatar
stangbanger
Senior User
Joined: Dec 2007
Posts: 356
Likes: 0
Originally Posted by Rulebreaker
It's a HP Dana 44. Reverse cut gears are needed. RB
What is this thick cut gear i keep seeing? Will a 488 go into my 44 front housing?
 
Reply
Old Mar 5, 2009 | 05:28 AM
  #14  
Rulebreaker's Avatar
Rulebreaker
Senior User
Joined: Sep 2003
Posts: 467
Likes: 0
From: Manton,MI
Originally Posted by stangbanger
What is this thick cut gear i keep seeing? Will a 488 go into my 44 front housing?
Depending on what carrier you have you can go as low as 5.13. I cant remember off hand where the carrier break is on a 44, but I had to change carriers when I went from 3.55 to 4.56. RB
 
Reply
Old Mar 5, 2009 | 06:06 AM
  #15  
DH8838's Avatar
DH8838
Junior User
Joined: Feb 2009
Posts: 58
Likes: 0
From: Maxville Florida
I have 37's on my truck with stock gears, so i found a guide that says put 4.88 or 5.13 gears on it, i think i'll go with the 4.88 for my truck
 
Reply



All times are GMT -5. The time now is 04:40 PM.

story-0
10 Ugly Ford Trucks That We Still Kinda Love

Slideshow: 10 ugly Ford trucks that we still kinda love.

By Joe Kucinski | 2026-06-03 09:51:16


VIEW MORE
story-1
10 Things Every Truck Owner NEEDS (2026 Edition)

Slideshow: the best gifts for dads & grads

By Michael S. Palmer | 2026-06-03 15:43:58


VIEW MORE
story-2
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath

Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.

By Verdad Gallardo | 2026-06-03 11:38:36


VIEW MORE
story-3
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

Slideshow: 10 most expensive Ford trucks ever sold on Bring a Trailer.

By Joe Kucinski | 2026-05-27 16:24:34


VIEW MORE
story-4
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

Here's everything that has changed for the latest model year.

By Brett Foote | 2026-05-27 16:17:28


VIEW MORE
story-5
Top 10 Ford Truck Tragedies

Slideshow: Top 10 Ford truck tragedies.

By Joe Kucinski | 2026-05-18 19:34:33


VIEW MORE
story-6
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

And it might be even better than that.

By Brett Foote | 2026-05-18 19:26:42


VIEW MORE
story-7
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Slideshow: Does lowering an F-150 Lobo RUIN the ride quality?

By Michael S. Palmer | 2026-05-18 19:20:37


VIEW MORE
story-8
Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Slideshow: Ford's bizarre fishing-themed Explorer concept has resurfaced after spending decades largely forgotten.

By Verdad Gallardo | 2026-05-12 18:07:46


VIEW MORE
story-9
10 Best Ford Truck Engines We Miss the Most!

Slideshow: The 10 best Ford truck engines we miss the most.

By Joe Kucinski | 2026-05-12 13:09:47


VIEW MORE