new to fte n already askn for help - TX
Thread Starter
|
New User
Joined: Dec 2008
Posts: 2
Likes: 0
new to fte n already askn for help - TX
Sup everybody. new to fte. i wil gladly appreciate anyones help while working on my 1974 ford f100. this truck has been in the family since it was born. my dad bought it in '74 and we've had it ever since. can you believe it one owner. this baby has never had its engine opened up, but i think it might be time for some engine work. Problem i'm having with it is it doesn't stay on after initial warmup. I've been told that it has a vacuum leak, that it needs a new carburetor. if anybody can send me a diagram of the vacuum hoses where they all go that might help. it has 302 v8 in it with a 2 barrel. everything is original on it. any help or advice would help.
FTE Leadership Emeritus
Joined: Aug 2007
Posts: 42,085
Likes: 6
From: Lakewood, Ca.
Welcome to FTE!
Sounds like you have a keeper there!
If you post your questions in this forum: https://www.ford-trucks.com/forums/forum38/ there are lots of knowledgeable and friendly folks that can get you going in the right direction.
Also stop by the Texas chapter forum https://www.ford-trucks.com/forums/forum96/ and post your intro there.
Good luck and thanks for signing up!
Sounds like you have a keeper there!
If you post your questions in this forum: https://www.ford-trucks.com/forums/forum38/ there are lots of knowledgeable and friendly folks that can get you going in the right direction.
Also stop by the Texas chapter forum https://www.ford-trucks.com/forums/forum96/ and post your intro there.
Good luck and thanks for signing up!
Thread
Thread Starter
Forum
Replies
Last Post
