FPR wiring diagram
Postmaster
Joined: Sep 2007
Posts: 4,195
Likes: 6
From: Medford Oregon
Bottom connection on canister is "Water In Fuel Sensor".
Middle connection on canister is "Heater Connection".
Top connection on canister is "Fuel Filter Restriction Sensor".
To the best of my knowledge .. don't know the color codes on the wires though.
Middle connection on canister is "Heater Connection".
Top connection on canister is "Fuel Filter Restriction Sensor".
To the best of my knowledge .. don't know the color codes on the wires though.
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
Thread Starter
|
Posting Guru
Joined: Jul 2004
Posts: 1,686
Likes: 0
From: East Tn
Do I really need any of these? I've got a pipe plug in the fuel restrictions place. I took the fuel heater out, and my water in fuel light has never came on. I'd rather just leave unplugged if not needed.
Thread Starter
|
Posting Guru
Joined: Jul 2004
Posts: 1,686
Likes: 0
From: East Tn
How did you completly remove the canister? I couldn't get the wire loom loose from what ever it conects to.
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
In the center of the pic is the connector of the wire loom is in the passenger side.
