Are the fenders from a 1940 1.5 ton the same as what was used on the 3/4 or 1 ton pickups?

Thanks.

 

Yeah, same fenders, they will interchange

 

Thanks, that what I thought based on looking at pictures. How about rear fenders for a '40 1 ton pickup? What else will fit. Sorta looks like maybe even up to '47 used the same rear fender but when did they start.

 

53deere, have pair of stainless trim for sides of hood off 40 1.1/2 ton if interested. are you parting out 40 ford 1.5 tonner? if so, what do you have? petey shoes

 

I thought the 3/4 & 1 ton 40/41's (16" & 17" wheels) had smaller fenders than the heavy trucks ( with 20" wheels)

 

The 40-41 trucks, larger than 1/2 ton, all used the same fender, listed as an 01T in Ford parts books.
As for rear fenders, if we are talking the 1 ton pickup body, then the '38-'41 all used the same if they are 1 tons. The '42 and up called for a different fender, not sure what the difference is, never had the chance to compare a '38-'41 and a '42-'47 1 ton rear fender.

 

I have a 47 1 ton and the rear fenders are bigger than the 1/2 ton. Some is due to wheel size, some is also due to larger bed size.