fan controls

Reply Subscribe

Thread Tools

Search this Thread

Dec 13, 2007 | 05:36 PM

mjdh_80

Thread Starter

New User

Joined: Dec 2007

Posts: 8

Likes: 0

fan controls

I just bought a 2003 Expedition SSV, it was used as a patrol vehicle for a police dept. in west MI. This is my first Expy, I had a crown vic P71 before this. My problem is, the fan for the heat/vent, etc. only comes on when the dial is set to 4. Does anyone have any advice

Dec 13, 2007 | 08:58 PM

projectSHO89

Hotshot

Joined: Jan 2004

Posts: 19,762

Likes: 1,079

From: St Louis

same as always - resistor pack.

Dec 14, 2007 | 06:39 PM

mjdh_80

Thread Starter

New User

Joined: Dec 2007

Posts: 8

Likes: 0

Thank you very much! I guess I should've did a search. Just did one found all the info I need.

Dec 20, 2007 | 05:16 PM

fitzy67

Senior User

Joined: May 2007

Posts: 126

Likes: 0

resistor for fan motr

where did you find the infor for the resistor repair? fitzy67

Dec 20, 2007 | 09:29 PM

mjdh_80

Thread Starter

New User

Joined: Dec 2007

Posts: 8

Likes: 0

do a search for resistor pack

Dec 21, 2007 | 10:25 PM

jbdecke1

New User

Joined: Jun 2004

Posts: 20

Likes: 0

Where is the resistor pack located on a 2003 Expedition? I am having the same problem.

Dec 22, 2007 | 08:38 AM

fitzy67

Senior User

Joined: May 2007

Posts: 126

Likes: 0

resistors

I believe, according to Hayes manual, that they are located on the blower motor behind the glove box. It requires removal of the glove box. good luck fitzy67