Y-Block Part Needed..........

Reply Subscribe

Thread Tools

Search this Thread

Dec 1, 2006 | 09:27 AM

e william

Thread Starter

Elder User

Joined: Mar 2003

Posts: 929

Likes: 0

From: S.C.

Y-Block Part Needed..........

Hi All,
I am still in search of the gasket cover piece that goes on with the starter on y-blocks. Does ANYBODY know where these can be found or possible have a good used one laying aroung that they would want to sell???

Thanks, Ed

Dec 1, 2006 | 11:43 AM

M6EV139445

Junior User

Joined: Aug 2006

Posts: 98

Likes: 0

Hi,

Could you please be more specific about what you're looking for. If you could post a photo of the part or even of the place where the part usuually goes, that would be helpful.

Dec 1, 2006 | 12:04 PM

Fomoko1

Moderator

Joined: Dec 2003

Posts: 97,442

Likes: 1,995

From: Saskatoon, Saskatchewan

It sounds like the rubber/metal seal between the starter and the engine block.

Dec 1, 2006 | 06:14 PM

e william

Thread Starter

Elder User

Joined: Mar 2003

Posts: 929

Likes: 0

From: S.C.

Got It !!!

Thanks to Fomoco and M6..... for the replies.

What I was looking for is called "Starter to Flywheel Housing Seal" and I found it at the following...

www.earlyford.com B4A6346 $7.95
www.cgfordparts.com same# $10.00 (has a picture)

It is a metal gasket covered in rubber with a wider edge on the block side.

I am having lock-up issues on this site when uploading a picture or I would add one to this post.

thanks again, Ed

Dec 2, 2006 | 06:37 AM

e william

Thread Starter

Elder User

Joined: Mar 2003

Posts: 929

Likes: 0

From: S.C.

Here's the picture I promised...

Dec 4, 2006 | 11:49 AM

M6EV139445

Junior User

Joined: Aug 2006

Posts: 98

Likes: 0

Thanks for the photo, but I'm sorry to say that I don not have one of those.

Dec 4, 2006 | 01:40 PM

Fomoko1

Moderator

Joined: Dec 2003

Posts: 97,442

Likes: 1,995

From: Saskatoon, Saskatchewan

Thanks for the info, that is the part I was thinking of and now I know where to obtain it.

Trending Topics

BREAKING: Ford Drops 6.8L V8 and Standard 6.7L Power Stroke from 2027...

138

10.4k
FX4 Real-World Use

29

772
New F-250 owner, coming from GMC/thoughts

26

1.1k
How should I fill in this gap?

23

368
My 1976 F-250

3.7k

255.9k

Dec 4, 2006 | 03:09 PM

arctic y block

Post Fiend

Joined: Sep 2006

Posts: 14,325

Likes: 14

From: Island Southeast Alaska

I have one but is my only spare. Mummert's Ford-y-block.com or Dennis Carpenter. I would only part with mine for what it would cost to replace it at the above sites . I haven't tried it yet but was led to believe that a later ford starter will work. No long starter drive and no seal. Some one let me know if this later starter will work.