03 Excusion armrest
Thread Starter
|
Junior User
Joined: Jan 2005
Posts: 50
Likes: 0
03 Excusion armrest
my drivers side armrest is loose, meaning it has no resistance going up or down. how can i tighten this? do i have to go up from the rear bottom of the seat, or something else? it does not appear that the armrest cover comes off.
thanks in advance
thanks in advance
Thread Starter
|
Junior User
Joined: Jan 2005
Posts: 50
Likes: 0
Originally Posted by Jay
Yes it does - There is a bolt that holds the arm rest on. You get to it by carefully pulling back the arm rest upolstry. It has an elastic band and when you pull it back, the bolt head will be exposed.
Postmaster
Joined: Jul 2006
Posts: 2,632
Likes: 4
Originally Posted by Jay
Yes it does - There is a bolt that holds the arm rest on. You get to it by carefully pulling back the arm rest upolstry. It has an elastic band and when you pull it back, the bolt head will be exposed.
Last edited by VaSheriff; Nov 3, 2006 at 08:48 PM.
Thread Starter
|
Junior User
Joined: Jan 2005
Posts: 50
Likes: 0
Originally Posted by VaSheriff
My driver's arm rest goes down too far. Like it's trying to point at the floor. Is there an adjustment for this?
thanks jay
