4x4 system schematic
Thread Starter
|
Senior User
Joined: Aug 2005
Posts: 140
Likes: 0
From: utah
4x4 system schematic
Does anyone know where to get a schematic of the 4x4 electrical system on a 2000 f-350? Trying to troubleshoot and I have sort of determined that it must be electrical. Dont really want to pay for a manual although having a manual would be nice.
Thanks
Thanks
Thread Starter
|
Senior User
Joined: Aug 2005
Posts: 140
Likes: 0
From: utah
It is a 2000 f-350 manual with shift on the fly and manual hubs. Sometines it will engage in four high and the dash light will come on. If I put it in four low The dash light light turns off and stays in four high. Usually I have to jump the relays to get it to disengage. I have checked the transfercase shift motor and connections. Motor seems okay, not getting much at the connections. Switch on the dash is fine and fuses and relays are good. The vaccuum pump seems to be working fine also and I am following the steps to engage four wheel drive correctly.( brake depressed, clutch depressed, etc.) Seems to me it must be something electrical somwhere between the transfer case motor and the relays. Any Ideas? Thanks in advance.
