VisionBulbs HID Conversion Kit??
Thread Starter
|
New User
Joined: Feb 2004
Posts: 22
Likes: 0
VisionBulbs HID Conversion Kit??
I was wondering if anyone has tried these out on their SuperDuty? I usually get brighter bulbs, but for about 2-3 times the cost of good bulbs, if I could upgrade to an HID kit, I'd do it.
If not, has anyone converted to HID with any other brand?
Any input would be appreciated!
Thanks
If not, has anyone converted to HID with any other brand?
Any input would be appreciated!
Thanks
Tuned
Joined: Aug 2005
Posts: 499
Likes: 0
From: Brew City, USA New Berlin
Are you talking about a real HID kit? I've been looking for one for the truck but I can't find one.
I bought an HID conversion for 9008 bulbs but it turns out it is low beam only.
If you find a 9008 HID HI/Lo conversion kit let me know.
I bought an HID conversion for 9008 bulbs but it turns out it is low beam only.
If you find a 9008 HID HI/Lo conversion kit let me know.
Thread Starter
|
New User
Joined: Feb 2004
Posts: 22
Likes: 0
The one I was looking at is for a 9007 conversion to work in the factory head lamp. Would probably work much better with a projector lamp.
Milwaukee,WI, How did the conversion for yours work on Lo-beam?
check this out and let me know if it is similar to the one you tried if you could.
Thanks
http://www.visionbulbs.com/vb_produc...&dmv=141738000
Milwaukee,WI, How did the conversion for yours work on Lo-beam?
check this out and let me know if it is similar to the one you tried if you could.
Thanks
http://www.visionbulbs.com/vb_produc...&dmv=141738000
Tuned
Joined: Aug 2005
Posts: 499
Likes: 0
From: Brew City, USA New Berlin
jd,
I didn't put the kit in. Its sitting in my office collecting dust for the past couple of months. I didn't want to lose my hi-beams. (I use them too much when a bimbo in a corolla on the cell phone cuts me off)
If I wanted to put the kit in I would have had to cut the stock connections and solder a connection to the HID ballast/igniter as the hi/lo 9008 bulbs have a 3 prong connection and the connection that came with the HID conversion came with a 2 prong connection.
I plan to just buy 9007 bulbs and install the kit on my motorcycle.
For the truck I'm going to wait until they come out with a hi/lo setup for 9008 bulbs.
The kit you have there looks very similar. I think mine was actually a mccullough kit but I do believe it had vision bulbs. If you are paying more then $290 for the kit send me a PM. I have a source that can get you any HID conversion for under 3 bills.
I didn't put the kit in. Its sitting in my office collecting dust for the past couple of months. I didn't want to lose my hi-beams. (I use them too much when a bimbo in a corolla on the cell phone cuts me off)
If I wanted to put the kit in I would have had to cut the stock connections and solder a connection to the HID ballast/igniter as the hi/lo 9008 bulbs have a 3 prong connection and the connection that came with the HID conversion came with a 2 prong connection.
I plan to just buy 9007 bulbs and install the kit on my motorcycle.
For the truck I'm going to wait until they come out with a hi/lo setup for 9008 bulbs.
The kit you have there looks very similar. I think mine was actually a mccullough kit but I do believe it had vision bulbs. If you are paying more then $290 for the kit send me a PM. I have a source that can get you any HID conversion for under 3 bills.
