U-Joints
Junior User
Joined: Jan 2005
Posts: 61
Likes: 0
Thats like asking do you want fries with that!! In my PERSONAL opinion, the whole idea that; "If we make everything greasless so no one can put the wrong grease in it" is crap. Now I know certain greases are for certain things, but even the wrong grease is better than no grease. So go with the zerks.
Posting Guru
Joined: Mar 2003
Posts: 1,349
Likes: 3
From: Cloud USA
Most times you wont be able to grease the ujoints on the truck anyways. I have greaseble ones on my front driveshaft which I can lube, But cant lube the ones on the rear without pulling the driveshaft off.
Junior User
Joined: Jan 2005
Posts: 61
Likes: 0
possibly because you have straight zerks and not ones with either a 45 or 90 degree angle. Ive never had to remove a driveshaft just to grease the joints. Not to mention greasing a U-joint while its not bolted in will push the cups off if its a flange type joint.
