Hello evryone!
Thread Starter
|
New User
Joined: Feb 2005
Posts: 9
Likes: 0
Hello evryone!
Hello everyone My name is Dan and I liked to be called Dan the ranchero man. I have two rancheros a 79 and a 74. both are 460/C6 powered trucks. The 79 I restored and have been crusing for over 12 years now and the 74 is a truck that I have had for over 20 but have just finished a frame off resto about a year ago. I am looking forward to helping out and learning from the people on this site. take care Dan the ranchero man.
FTE Leadership Emeritus
Joined: Jan 2003
Posts: 161,999
Likes: 75
From: 3rd Rock
...Welcome to Ford Truck Enthusiasts!
If you have a minute check out this out:
https://www.ford-trucks.com/forums/s...d.php?t=300691
We are pleased you have chosen the best source for Fords!
Enjoy FTE
….
See you on the boards.
If you have a minute check out this out:
https://www.ford-trucks.com/forums/s...d.php?t=300691
We are pleased you have chosen the best source for Fords!
Enjoy FTE
…. See you on the boards.
Thread Starter
|
New User
Joined: Feb 2005
Posts: 9
Likes: 0
70-73 rancheros would be sporting a 429/C6 set up (if factory installed) the 460 came out in 74 and was an option until 76. The 429 and the 460 are the same engine except for crankshafts and pistions (if you did not already know this). Good luck with your search. You could go on google search and type in Ranchero US and the ranchero US website should come up. That is a pretty good place to start if you want to find one and all the guys and gals are real nice folks! Take care Dan the ranchero man.
Thread
Thread Starter
Forum
Replies
Last Post
