Radius arm insulators
Thread Starter
|
New User
Joined: Jan 2004
Posts: 19
Likes: 0
Radius arm insulators
I have a 93 Ranger ext. cab 2WD with the 3.0L. Anyone know of good aftermarket radius arm insulators? I have been using OEM ones since I've own this truck (bought used in 95). I can only get 2 years out of them, then they will thump during the cold winter months and continue until I replace them. Very annoying. The only weak link on this otherwise fine truck. 265,000 Km and counting.
Cargo Master
Joined: Aug 2003
Posts: 3,237
Likes: 3
From: Belleville, Ontario
Welcome to FTE!
I did a search & came up with this:
https://www.ford-trucks.com/forums/s...earchid=237528
Lots of reading & you should find comments about what's better.
AL.
I did a search & came up with this:
https://www.ford-trucks.com/forums/s...earchid=237528
Lots of reading & you should find comments about what's better.
AL.
Cargo Master
Joined: Aug 2003
Posts: 3,237
Likes: 3
From: Belleville, Ontario
https://www.ford-trucks.com/forums/s...earchid=238532
Double checked this one & it worked twice.
If there's something going on with the site having problems, click on SEARCH in the blue ribbon above these posts and type in radius arm bushings. That's what I did to find the info.
AL.
Double checked this one & it worked twice.
If there's something going on with the site having problems, click on SEARCH in the blue ribbon above these posts and type in radius arm bushings. That's what I did to find the info.
AL.
Last edited by Dealford; Aug 15, 2004 at 05:30 PM.
