what would happen
Thread Starter
|
Senior User
Joined: Jul 2003
Posts: 286
Likes: 0
From: spring valley ohio
what would happen
say if i was going to flip a np 205 upside down so the out put shaft would work for my truck what all would happen if any thing. ps its a divorced case. had to find divorced ford cases aroud here
Thread Starter
|
Senior User
Joined: Jul 2003
Posts: 286
Likes: 0
From: spring valley ohio
yea i dont think it will work. man i wish i could find more stuff in the yard but they are starting to cruch the old stuff to make room for new. but i cant find any high boys
Postmaster
Joined: Dec 2002
Posts: 3,959
Likes: 9
From: USA
I thought the 205 was splash lubed = no pump. At any rate, if it was flipped upside down, the case would probably be sticking up through the floor and the front driveshaft would have to be lengthened, and subject to more of an angle.
Im guessing you're wanting to use a Chevy case in your Ford? You could use the Chevy case right side up with a Chevy front axle...
Im guessing you're wanting to use a Chevy case in your Ford? You could use the Chevy case right side up with a Chevy front axle...
