3.0 V6 issue
#1
3.0 V6 issue
My 2004 Ranger started missing. computer codes said misfire on cyl 3 I changed the plugs, wires, coil and fuel injector. When I put it back together it started and ran at normal speed with a miss then slowly the idle slowed down and it barely runs. Vacuum guage shows it fluxuating between 5 and 10" of vacuum. I then changed the head gaskets, intake gaskets and the issue remains. I didn't see any burnt valves. As I was troubleshoting I removed the vacuum line from the side of the throttle body and the engine sped up and started to smooth out but it popped through the port so I plugged it back in. Thinking maybe the air bypass valve? I removed it and the plunger is kinda floppy but I don't know what it's supposed to be like.
#2
Thread
Thread Starter
Forum
Replies
Last Post
Slobin3d
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
08-05-2016 07:41 AM
bhays77
Explorer, Sport Trac, Mountaineer & Aviator
2
07-23-2014 09:23 PM
jemini
1987 - 1996 F150 & Larger F-Series Trucks
23
10-18-2007 07:54 AM
BltFordTough
1983 - 2012 Ranger & B-Series
20
11-03-2005 07:18 PM