ISO transfercase adapter and transmission output shaft.
Thread Starter
|
New User
Joined: Sep 2017
Posts: 2
Likes: 0
ISO transfercase adapter and transmission output shaft.
Hey so i got a project iv been working on and it comes to my attention i need a long transfercase adapter. I have a ford c6 transmission running into a np205 tcase. Right now there is the 5 3/4" adater but i need the longer 8 3/4" adapter as well as the transmission output shaft that i belive is 18 3/4 or 18.5 long. I have got cv style drive shafts made and this is the last peice of my puzzle. If anyone can help it would be much appreciated, im also building on a budget here so work with me if possible. And if your interested its a 88yj with the drive train from a 79 f150. 351m, c6 tranny, np205 t-case, ford 9" rear and high pinion front sittn with about 12" of lift and 44" gumbo monster mudders. Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post
1979meangreen
1973 - 1979 F-100 & Larger F-Series Trucks
2
Mar 3, 2005 12:14 AM
CMeggman
Clutch, Transmission, Differential, Axle & Transfer Case
2
Dec 16, 2004 09:19 PM
battered_bronco
Clutch, Transmission, Differential, Axle & Transfer Case
7
Dec 18, 2003 10:53 PM
red68ranger
1967 - 1972 F-100 & Larger F-Series Trucks
1
May 9, 2000 04:53 AM
