Parking Sensors in FORscan
Thread Starter
|
Elder User
Joined: Feb 2007
Posts: 805
Likes: 1
From: South Bend, IN
Parking Sensors in FORscan
Hello all!
Its been a long time but I'm finally back in another Super Duty after a long hiatus. I am considering getting the front and rear bumpers Line-X'd/Rhino'd or at the bare minimum, replaced with new chrome units on my 2012. I do not care to lose the parking sensors, and in fact would prefer it if they didn't activate to begin with. Does anyone know if the parking sensors can be coded out in the BCM controls through FORscan?
Thanks in advance!
Its been a long time but I'm finally back in another Super Duty after a long hiatus. I am considering getting the front and rear bumpers Line-X'd/Rhino'd or at the bare minimum, replaced with new chrome units on my 2012. I do not care to lose the parking sensors, and in fact would prefer it if they didn't activate to begin with. Does anyone know if the parking sensors can be coded out in the BCM controls through FORscan?
Thanks in advance!
Post Fiend
Joined: Nov 2001
Posts: 6,748
Likes: 118
From: Tallassee, ALabama
Check this thread in the 6.7 forum and/or sk your question there. You might also check the F-150 forum.
https://www.ford-trucks.com/forums/1...lt-data-6.html
https://www.ford-trucks.com/forums/1...lt-data-6.html
New User
Joined: Nov 2021
Posts: 1
Likes: 0
Hello all!
Its been a long time but I'm finally back in another Super Duty after a long hiatus. I am considering getting the front and rear bumpers Line-X'd/Rhino'd or at the bare minimum, replaced with new chrome units on my 2012. I do not care to lose the parking sensors, and in fact would prefer it if they didn't activate to begin with. Does anyone know if the parking sensors can be coded out in the BCM controls through FORscan?
Thanks in advance!
Its been a long time but I'm finally back in another Super Duty after a long hiatus. I am considering getting the front and rear bumpers Line-X'd/Rhino'd or at the bare minimum, replaced with new chrome units on my 2012. I do not care to lose the parking sensors, and in fact would prefer it if they didn't activate to begin with. Does anyone know if the parking sensors can be coded out in the BCM controls through FORscan?
Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post