Eaton 2 Speed stud thread pitch and diameter
Thread Starter
|
Mountain Pass
Joined: Aug 2014
Posts: 224
Likes: 62
Eaton 2 Speed stud thread pitch and diameter
Would someone be able to tell me the diameter and the thread pitch of the studs on an eaton rear end? I am talking about the studs that the inner lugs thread on to on a stud piloted system.
Thanks
Thanks
Marmon-Herrington Man
Joined: Jul 2005
Posts: 11,986
Likes: 444
From: Central Illinois
Are you wanting the specs for the Budd style "dual cap nuts", or DCNs? The inner stud is the same 3/4" x 16" tpi as for the front axle. The DCN threads on to that stud, holding the inner dual, and takes a 1 1/8" x 16 tpi outer nut to hold the outer dual. These are standard pieces that have been in use many decades. Stu
http://truckhub.us/yahoo_site_admin/...f.96161249.pdf
http://truckhub.us/yahoo_site_admin/...f.96161249.pdf
Logistics Pro
Joined: Feb 2005
Posts: 3,952
Likes: 117
From: Upper Left Coast
Cheers,
Rick
Thread
Thread Starter
Forum
Replies
Last Post
abe
1948 - 1956 F1, F100 & Larger F-Series Trucks
1
Feb 10, 2012 05:25 PM
shaggymane
Clutch, Transmission, Differential, Axle & Transfer Case
4
Apr 29, 2004 12:42 AM
