Bedside tool box
Thread Starter
|
New User
Joined: Sep 2015
Posts: 22
Likes: 1
Bedside tool box
I have a bed side toolbox I bought, and I haven't Been able to find a bed with one in it to look at for reference or online, does anyone have a diagram or pictures of what goes where and where everything is mounted thanks!
Cargo Master
Joined: May 2010
Posts: 3,365
Likes: 12
From: NW Indiana
Do you have the surrounding metal cause it stamped and life is much easier with it?
It would be a nightmare without it..... and I've put them on both sides.
Assuming you have it, I left about an inch around the opening and removed the rest. I just laid it up against the truck where I thought it looked right, curves lined up and cut the hole.
It would be a nightmare without it..... and I've put them on both sides.
Assuming you have it, I left about an inch around the opening and removed the rest. I just laid it up against the truck where I thought it looked right, curves lined up and cut the hole.
Thread
Thread Starter
Forum
Replies
Last Post
72CC428
1967 - 1972 F-100 & Larger F-Series Trucks
2
Oct 4, 2018 10:32 AM
