Adding ford EFI on 1970 motor
Thread Starter
|
Elder User
Joined: May 2001
Posts: 646
Likes: 0
From: East Norriton,PA
Adding ford EFI on 1970 motor
Group
is it possible to add factory ford efi onto an older motor??
If i pirated the intake, wiring and computer from a 460 efi Van
can i get it to work???
I know all about the hard lines and fuel pumps etc from my
5.0 mustang days...
Just wodering if i also took a speed density system from a mustang and used that instead too???
is it possible to add factory ford efi onto an older motor??
If i pirated the intake, wiring and computer from a 460 efi Van
can i get it to work???
I know all about the hard lines and fuel pumps etc from my
5.0 mustang days...
Just wodering if i also took a speed density system from a mustang and used that instead too???
Posting Guru
Joined: Apr 2003
Posts: 1,153
Likes: 1
From: Venezuela
Adding ford EFI on 1970 motor
You can doit, but probably will be difficult to tune up if you use stock computer, also you can get a lot of fault codes. Could be better replace computer for any model you can reprogram to obtain all possible HP from engine.
Regards;
Regards;
