Sandersons on a 4x4 F100?
Thread Starter
|
Mountain Pass
Joined: Feb 2013
Posts: 152
Likes: 21
From: N. Scituate, RI
Sandersons on a 4x4 F100?
Anyone running the Sanderson FF427's on a 4x4 F100? I'm looking at options for my 73. Curious if there were any install issues.
If not, I will email Sanderson and post my findings here. Thanks!
If not, I will email Sanderson and post my findings here. Thanks!
Fleet Owner
Joined: Dec 2009
Posts: 20,678
Likes: 82
From: NorCal
Ya won't have any issues running them on a 4x4... Issues typically arise when attempting to run an exhaust tube on the driver's side cuz manual linkages and the speedo cable usually get in the way.. that and auxiliary fuel tanks. But on a 4x4 it will be the T-case.. there will be enough room.
I recently picked up another set for my '73 4x4 to replace the long tubes.
Here are some pics for reference. Scroll through the entire thread because there are also installed pics but on a 2WD: https://www.ford-trucks.com/forums/1...-pictures.html
I recently picked up another set for my '73 4x4 to replace the long tubes.
Here are some pics for reference. Scroll through the entire thread because there are also installed pics but on a 2WD: https://www.ford-trucks.com/forums/1...-pictures.html
Thread
Thread Starter
Forum
Replies
Last Post
leedog13
1961 - 1966 F-100 & Larger F-Series Trucks
3
Apr 29, 2009 12:20 PM
