#5 ORB = ?
Thread Starter
|
Lead Driver
Joined: Sep 2010
Posts: 7,793
Likes: 50
#5 ORB = ?
Guys, got me a DIY kit to test hpop pressure. Problem is, i know its a #5orb, but i need to know what #5orb equals to, in thread size. With KELVARSON thread, about the fuel psi port being a #4, which equals to a 7/16"-20 thread, just need to know, what #5 equals to..thanks.
Thread Starter
|
Lead Driver
Joined: Sep 2010
Posts: 7,793
Likes: 50
That's taking "talking to yourself" to an extreme. 
Thread Starter
|
Lead Driver
Joined: Sep 2010
Posts: 7,793
Likes: 50
ALTERNATIVE HOSE INC.
This company is located in Anaheim. I past buy it everyday, so me and buddy went over there, thinking we can get the parts needed to make a DIY fuel/oil and hpop tester. To my surprise, the fittings, not only did they have them in stock, but were only $1.80..
Alternative Hose Inc..714-414-0904
Were going monday to see what the hpop lines will cost. I still have mine in the d/s door. they mentioned they have the quick connect fittings, but my buddys' think'n of just having straight fittings installed for head / hpop
Anybody know size fitting/thread, on hpop side?
I'll post up price when i find out...
Alternative Hose Inc..714-414-0904
Were going monday to see what the hpop lines will cost. I still have mine in the d/s door. they mentioned they have the quick connect fittings, but my buddys' think'n of just having straight fittings installed for head / hpop
Anybody know size fitting/thread, on hpop side?
I'll post up price when i find out...
Thread
Thread Starter
Forum
Replies
Last Post
