351 windsor Parts needed
Thread Starter
|
Freshman User
Joined: Dec 2011
Posts: 32
Likes: 0
351 windsor Parts needed
I need some 351 windsor v belt pulleys. Also could use some valve covers that will clear roller rockers,oil pan with dip stick, holly 650, long tube headers and more. PLease give me a call if you have any parts for sale. 907-242-8180 Ian
Fleet Owner
Joined: Aug 2001
Posts: 29,941
Likes: 46
From: Drummonds, TN USA
Shoot me a PM - I have a lot of stuff like that I have just laying around from projects down here in Tennessee
Are you going V-belt, or serpentine?
I have a set of comp valve covers with breather reliefs that were just given to me. Also a pan with a truck sump - may or may not work but I don't need it.
You should go with a serpentine setup, because the coolant ports are bigger - which is why I have leftover old style V-belt things laying around.
Serp is also simpler
PM an address, and I'll put together what I have or can find and just send my extras up to ya!
We can work this as a "GENTLEMANS AGREEMENT". I will send the stuff to ya - what you think it is worth is up to you, and then there is the shipping cost.
I have seldom met anyone at FTE who is not 100% real, so I will do this on trust alone
~If you have any doubts, ask arctic y block if I am the real deal!
I realise that there are few scrapyards in AK, I can help from down here and am happy to.
~Wolfie
Are you going V-belt, or serpentine?
I have a set of comp valve covers with breather reliefs that were just given to me. Also a pan with a truck sump - may or may not work but I don't need it.
You should go with a serpentine setup, because the coolant ports are bigger - which is why I have leftover old style V-belt things laying around.
Serp is also simpler
PM an address, and I'll put together what I have or can find and just send my extras up to ya!
We can work this as a "GENTLEMANS AGREEMENT". I will send the stuff to ya - what you think it is worth is up to you, and then there is the shipping cost.
I have seldom met anyone at FTE who is not 100% real, so I will do this on trust alone
~If you have any doubts, ask arctic y block if I am the real deal!
I realise that there are few scrapyards in AK, I can help from down here and am happy to.
~Wolfie
Thread
Thread Starter
Forum
Replies
Last Post
restoringmy46
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
4
Mar 2, 2009 03:32 PM
66BroncoWA
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
5
May 30, 2005 02:07 PM
