Category: Drivetrain
Price: $50
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): Prelude, Fit, S2000
Item Condition: PA
Shipping Information: Item can be shipped

I'm stripping and building a '79 Ford Kingpin HP Dana 60. So, I'm selling the stock parts I don't need:


Both Knuckles - $125 - no spindles, no caliper brackets, right knuckle looks great, left knuckle was repair welded above the tie rod and has probably been run like that for years, TRE hole looks a little rounded out on left one too. Use heim joints or highsteer.

Right and Left Inner & Outer Shafts - $50 each - All 4 look great, splines & ears, need u-joints. STUB SHAFTS SOLD. INNERS PENDING SALE, DEPOSIT TAKEN.

Original Lockout Hubs - $100 - Complete, look good.

Carrier & 3.54 Gears w/ Pinion - $100 - Looks great, complete with bearings.

Kingpin Parts - $25 - SOLD.

Original Steering Arm - $35 - Good.

Original 1330 Yoke - $35 - Good.


I've sold 3 complete 78-79 kingpin 60's this season. Finally one for me!

 

Stub shafts sold. Inners available at $50 each.

 

Deposit taken on the inners...and kingpin parts sold.

 

ALL SHAFTS, BOTH KNUCKLES AND STOCK STEERING ARM ARE SOLD.

Hubs are also not available, I'm holding on to those..

 

The carrier with gears and bearings, and the diff cover ARE still available! Everything else has been sold!