adjustable ball for hitch
Thread Starter
|
New User
Joined: Aug 2010
Posts: 15
Likes: 0
adjustable ball for hitch
Did not know if this has been discussed but what is everyone using on our 2.5" recievers looking for an adjustable 2 and 2/5/16 diversitech, andersen rapid hitch with a sleeve for the two inch. Any help would be appreciated
Lead Driver
Joined: Nov 2005
Posts: 5,222
Likes: 4,232
From: Kaysville Utah
Most are just using the sleeve/reducer to drop back to a 2" reciever.
Since most the adjust-a-hitch type of ***** are only rated at 8000lbs the 2" should be fine.
If you need the rating that the 2.5" offers. The current crop of adjustable just don't rate that high. Maybe in time the mfg will build a beefer towbar/ball that will meet the ratings offered by the 2.5" reciever.
Since most the adjust-a-hitch type of ***** are only rated at 8000lbs the 2" should be fine.
If you need the rating that the 2.5" offers. The current crop of adjustable just don't rate that high. Maybe in time the mfg will build a beefer towbar/ball that will meet the ratings offered by the 2.5" reciever.
Cargo Master
Joined: Aug 2010
Posts: 3,225
Likes: 63
Here is the answer I received from Anderson.
We have plans for but no announcement date of when we will release a 2.5” shank on rapid hitch. In the mean time we offer a lock set with a longer receiver pin to use rapid hitch with a sleeve. #3492
Andersen Hitches
Thank you
Matt Darrington
Sales Director
800-635-6106
mattd@anderseninc.com
We have plans for but no announcement date of when we will release a 2.5” shank on rapid hitch. In the mean time we offer a lock set with a longer receiver pin to use rapid hitch with a sleeve. #3492
Andersen Hitches
Thank you
Matt Darrington
Sales Director
800-635-6106
mattd@anderseninc.com
