POPA JOHN
Fall truck projects
Elder User
Joined: Feb 2008
Posts: 578
Likes: 0
SEE WE GOT STUFF GOING ON
Hoping to rebuild the old girls engine this spring and do the rearend , but I guess that's really a fall not project but so what it's something.
Last edited by falconqueenD; Dec 23, 2010 at 06:10 PM. Reason: spelling
Fleet Mechanic
Joined: Aug 2010
Posts: 1,574
Likes: 6
From: Cranbrook, Ont., Canada
OntarioFarmer
Hey Ontario Farmer, Popa John here where abouts in Listowl are you? I'm over here in Cranbrook. Been lurking around the FTE forums for awhile now, learnt a LOT about the 351M/400s. Got one on the go now and I am looking for 400- 430 HP. E-mail is popajon@tnt21.com
Fleet Mechanic
Joined: Aug 2010
Posts: 1,574
Likes: 6
From: Cranbrook, Ont., Canada
Merry Xmas to one and all, I'M a newbie here at FTE ONtARIO Chapter.As I've said I have been lurking here at FTE for awhile. My project is a 1977 F-150 2wd XLT, my Dad bought it new in '77 wrote it off in '78 it sat for a few years I bought it wife wrote it off I fixed her and now For the last 20 or so years have been rebuilding it, In order to keep this entry short i"m open to any and all inquiries as to what I'M doing to her
Thread Starter
|
FTE Chapter Leader
Joined: Sep 2000
Posts: 3,863
Likes: 5
From: Beachville, Ontario
Sounds like a good project, popajon. Father of a friend has a 77 F150 that he's owned since new, was restored a few years ago. Not really a show truck, but a nice driver.
What all options besides the XLT does your truck have?
What all options besides the XLT does your truck have?
Fleet Mechanic
Joined: Aug 2010
Posts: 1,574
Likes: 6
From: Cranbrook, Ont., Canada
77 ranger XLT
Hey loudfords, no other options just the XLT, it was a tu-tone dark Green/white panels race track trim. After the Wife wrote it off I kind of went a little bananas on it. Went total Show Truck. Only has 36,000 kms. Redone interior Diamond tufft crushed red velvet, REAL walnut door panels ( hand made my self) Diamond head liner, interior of the box is done the same colour and walnut panels the length of the box, 2 Frenched areials, shaved door handles and topped off with Candy Brandy Wine paint ( House Of Kolor) took two firsts and 1 second in the shows i was at. Then she sat for 20 years hence the total rebuild. The engine was a 351M now it's a 408 flat top pistons ( Tim Meyers) edelbrock performer 650 holley Davis plug and play ignition headers 2 1/2 " exhaust. Heads have had the " smog" bumps taken out. Full roller rockers, roller cam etc. should be a stout motor. Sorry this is getting TOOO long so I'LL let go now.
Elder User
Joined: Feb 2008
Posts: 578
Likes: 0
MMMMMMMMMM'S
I have rather an unusual setup I'm putting on. At present I'm running a Holley 500 2BBL. When I cut chop rebuild Putting an edelbrock aluminum highrise 2BBL. with headers and a set of Mangna Flows.
Was Wondering what sort of cam you would think would go with that my truck is a 4x4 so i would be looking for something with some bottom.
Was Wondering what sort of cam you would think would go with that my truck is a 4x4 so i would be looking for something with some bottom.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Fleet Mechanic
Joined: Aug 2010
Posts: 1,574
Likes: 6
From: Cranbrook, Ont., Canada
PICS
I've got LOTS of pics. Only problem is haven't figured out how to post them as they are not on a digital camera, and the truck is a million pieces. Again!! I will, however try the obvious and sweet talk the old girl into helping me with the problem. Will post some pic asap.
Fleet Mechanic
Joined: Aug 2010
Posts: 1,574
Likes: 6
From: Cranbrook, Ont., Canada
falconqueenD
That set up sounds interesting. What intake are you planning on, the Performer or something else? I need to now what mods you have done before I would attempt to suggest a cam , like compression ratio, overbore etc.
Fleet Mechanic
Joined: Aug 2010
Posts: 1,574
Likes: 6
From: Cranbrook, Ont., Canada
fp_5
Yep,that truck has been thru a lot. I've had her for 30 years so there is a HUGE attachment.
The only other thing that I've kept any longer is THE old girl and that's about 42 yrs.
As before I will try and post some pics asap
The only other thing that I've kept any longer is THE old girl and that's about 42 yrs. As before I will try and post some pics asap
Elder User
Joined: Feb 2008
Posts: 578
Likes: 0
The Set Up
Intake Manifold is an Edelbrock Aluminum High rise 2BBL Planning to go 20 to 30 over. Keep you posted.
I've owned my truck for 15 years.
The Manifold is from the 70's
I've owned my truck for 15 years.
The Manifold is from the 70's
Last edited by falconqueenD; Jan 4, 2011 at 07:28 PM. Reason: forgot stuff
