Multi purpose switch wires
Thread Starter
|
New User
Joined: Jan 2007
Posts: 21
Likes: 0
Multi purpose switch wires
Hey guys I have a 02 150 crew 4x4 that when i lowered the steering wheel the blinkers would not work. I tore it apart today and just like I read on here the wires were coming out of the connector. The problem is i didn't realize it and all the wires came out of the connector. Now i'm not sure which wire goes where. I have searched for a diagram of the 7 wires on the top of the mps. There are 3 green 2 white orange and light blue wires. Any help on this would be very much appreciated. Thanks
Thread Starter
|
New User
Joined: Jan 2007
Posts: 21
Likes: 0
I think i figured out the wiring code. All greens on top orange and whites in middle and blue in lower corner. Come to find out I have a tail light blown. If anyone has something to add to this please do cause it might help someone else with this problem.
