fuse relay panel interior
Thread Starter
|
New User
Joined: Sep 2010
Posts: 2
Likes: 0
fuse relay panel interior
I have 97 f150 with a circuit problem in the interior fuse panel. It appears to snap together. Can it be disassembled and repaired? I have tried to separate the halves, but it seems stuck on the connector end.
Posting Guru
Joined: Oct 2005
Posts: 2,209
Likes: 1
From: Louisville, Kentucky
Welcome to FTE bn06jh! 
The central junction box (CJB) is sandwhiched with the Generic Electronic Module (GEM). I expect that the two can be seperated but I have not had the experience of working with this part of my truck. Good luck! 
The central junction box (CJB) is sandwhiched with the Generic Electronic Module (GEM). I expect that the two can be seperated but I have not had the experience of working with this part of my truck. Good luck!
Thread Starter
|
New User
Joined: Sep 2010
Posts: 2
Likes: 0
Fuse Relay Panel Disassembly
I removed the GEM module from the back. It seems to be held together at the center post of the plug area for the wiring. Since the front and back snap together, it seems logical that the assembly should come apart. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
rickrocket
1999 - 2016 Super Duty
2
May 11, 2012 11:23 AM
