Idler Pullies
Thread Starter
|
Cross-Country
Joined: Feb 2007
Posts: 75
Likes: 2
Idler Pullies
Hello Fellas,
I would like to change the serpentine idler pullies. The coating has worn off the stock pullies, and the rust is starting to hurt the backside of the belt. Also, wouldn't mind changing these out as preventative maintenance regarding the bearings.
2002 F350 7.3L with A/C.
Anyone have a list of the pullies and the part numbers?
Ford OEM OK?
Info and advice greatly appreciated. Thanks in advance.
I would like to change the serpentine idler pullies. The coating has worn off the stock pullies, and the rust is starting to hurt the backside of the belt. Also, wouldn't mind changing these out as preventative maintenance regarding the bearings.
2002 F350 7.3L with A/C.
Anyone have a list of the pullies and the part numbers?
Ford OEM OK?
Info and advice greatly appreciated. Thanks in advance.
PREMIUM SPONSOR
Joined: Feb 2009
Posts: 6,039
Likes: 74
Your best bet for OEM would be Ed, www.partsguyed.com and is a sponsor here. I will see if I can get the part numbers for you or just drop him an e-mail.
Posting Guru
Joined: Apr 2009
Posts: 2,447
Likes: 1
From: Northern Idaho
Clay is right, plus if you call him he'll help you out, he's a easy going guy and will give you a helping hand for sure!
At least I think so but only had to call him once due to my own mistake on my order then found out I needed the part I ordered anyhow, we had a decent laugh but he was on top of it, he had the RMA # ready anyhow! LOL
At least I think so but only had to call him once due to my own mistake on my order then found out I needed the part I ordered anyhow, we had a decent laugh but he was on top of it, he had the RMA # ready anyhow! LOL
Thread
Thread Starter
Forum
Replies
Last Post
