a harness or not
Thread Starter
|
New User
Joined: Jul 2010
Posts: 23
Likes: 0
a harness or not
i know painless makes harnesses that will plug into the new ecm to run the newer motors like the ls models and ford models. but do they make a harness for cummins/ps motors. i have a crazy idea to go diesel but no not really feel like taking the harness and buturing it to make it only the harness. i have 3 years of auto schooling a few years back. have rebuilt many cars with a few motor swaps so im pretty knowledgeable on everything just was woundering baout a pre made plug and play harness
FTE Leadership Emeritus
Joined: Jul 2002
Posts: 42,561
Likes: 423
From: Long Island USA
What do you want to accomplish? Put a mechanical diesel into a truck with a PCM? Or put an electronic diesel into a truck and reuse your existing PCM (which is impossible).
What you really want to do is use the harness and PCM that came with the new diesel and patch it into your existing system. If it's a typical "cummins swap" someone might make the adapter harness, is that what you want?
What you really want to do is use the harness and PCM that came with the new diesel and patch it into your existing system. If it's a typical "cummins swap" someone might make the adapter harness, is that what you want?
Thread Starter
|
New User
Joined: Jul 2010
Posts: 23
Likes: 0
yes im looking into swapping in a cummins or PS from say a 2003+ truck into my 67 and wanted to know of anyone made a harness from motor to ecu (meaning i have the motor, tranny and ecu already but not a harness) i dont mind making my own but a premade would be easier
