injector size questions!
Thread Starter
|
Junior User
Joined: Jan 2009
Posts: 97
Likes: 0
From: Liberty, Utah
injector size questions!
hey guys so i have had my truck for about a month now and am trying to figure out what size my injectors are for custom tuning. the po said that they were 180cc stage 2's how can i tell what size they are? i havent pulled the valve covers off yet due to time but i was going to just to have a look anyways thanks
PREMIUM SPONSOR
Joined: Sep 2003
Posts: 2,630
Likes: 217
From: North East Ohio
You will have no clue what the injectors are unless they are taken apart by a skilled technician and measured and inspected.
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
Hotshot
Joined: Jun 2007
Posts: 10,008
Likes: 7
From: Austin, TX
Did the PO say who the injectors came from?? If you can determine whether or not the PO was telling the truth then you will never have to take the valve covers off. If you have 180cc stage 2's in it then it should smoke a decent amount with stock tuning in it. have you pulled the kick panel off to see if there might happen to already be a chip in there?
Thread Starter
|
Junior User
Joined: Jan 2009
Posts: 97
Likes: 0
From: Liberty, Utah
yes it has a ts 6 position chip and on 1 it will smoke more than my dads superduty with his programer on level 3 on the extreme setting i can black out the freeway between the on ramp and the far left lane lol
Thread
Thread Starter
Forum
Replies
Last Post
