06 PSD Vibrations with leveling kit
Thread Starter
|
Senior User
Joined: Jan 2006
Posts: 203
Likes: 0
06 PSD Vibrations with leveling kit
06 F250 SC/SB PSD with factory 20's, Track Bar Relocation Bracket, 2 inch spacer and 5 inch rear blocks. I also have bilstein 5100 shocks and dual steering stabilizers. With this set-up the truck rides horrible. I have tried to correct the bump steer but it still wonders down the road. But my main concern is with the rear end vibration which seems to occur at 45 mph. The truck just doesn't seem to ride smooth at all and likes to bounce a lot. I am getting fed up with the bouncing and are looking for some way to solve my problem. Suggestions?
Hotshot
Joined: Nov 2000
Posts: 11,591
Likes: 14
From: Pflugerville, tx
they make shims to put under the springs at the blocks..
I don't know how much adjustment you need.. a 4x4 shop should be able to tell you, and might have the shims..
do it soon, before you damage the rear U joint and have to replace that too..
Sam
I don't know how much adjustment you need.. a 4x4 shop should be able to tell you, and might have the shims..
do it soon, before you damage the rear U joint and have to replace that too..
Sam
Thread
Thread Starter
Forum
Replies
Last Post
4EXTRDR
1999 - 2003 7.3L Power Stroke Diesel
3
May 6, 2012 06:58 AM
rosesrfree4u
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
Mar 26, 2011 11:01 PM
