injector cup install
Thread Starter
|
Laughing Gas
Joined: Aug 2006
Posts: 1,249
Likes: 11
From: oklahoma
injector cup install
will i need to coat the cups or just drive them in dry like a freeze plug?got a tool of ezbay to R&R them just wondering?oh and after i'm done the tool will be for sell
thanks john
thanks john
Posting Guru
Joined: Nov 2003
Posts: 2,214
Likes: 0
From: THUNDER BAY
YouTube - Changing Injector Sleeve on ford diesel 7.3L Part (2 of 2)
Seen this on you tube may help I can,t tell if that is grease or some kind of lock-tight stuff he is putting on them.
Seen this on you tube may help I can,t tell if that is grease or some kind of lock-tight stuff he is putting on them.
Senior User
Joined: Oct 2005
Posts: 400
Likes: 0
From: Jeffersonville IN
There used to be a member who had these tools and he would loan them to other members. Member would pay shipping use tool and when someone else needed it they would do likewise and pay shipping. Sort of a way to help all guys on forum save some money and promote good will. Just my thoughts.
PREMIUM SPONSOR
Joined: Sep 2003
Posts: 2,630
Likes: 217
From: North East Ohio
You need to use Green Loctite to seal the cups.
Apply along the top and bottom edge. Look at the old cup when it comes out and you'll see the 'clean' edge, this is where you apply the sealant on the new cup.
Apply along the top and bottom edge. Look at the old cup when it comes out and you'll see the 'clean' edge, this is where you apply the sealant on the new cup.
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
Thread
Thread Starter
Forum
Replies
Last Post
Finally Powerstrokin
1999 - 2003 7.3L Power Stroke Diesel
43
Aug 4, 2012 11:48 AM
