trans shifting issues
Thread Starter
|
New User
Joined: Jun 2010
Posts: 2
Likes: 0
trans shifting issues
I recently built a custom flatbed for my truck and installed some led taillight and the nest day the abs light would come on at 15 miles an hour and turn of when I would hit a turn indicator and My tranny is will not go into complete tc lockup I read some saying that you have to put resistors inline with the leds for this to go away does any one know what size resistors to use. and second before I found that post I thought I had a shorted wire so I went poking around and now my truck will not start, IDM? cannot connect with computer using scanner is not getting a signal.
Senior User
Joined: Mar 2009
Posts: 135
Likes: 0
From: Westby, MT
Did you disconnect the batteries if you did any welding on the truck, just thinking you could of fried something
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
