Cruise control, stumped.
Thread Starter
|
Senior User
Joined: Dec 2008
Posts: 192
Likes: 0
From: Canada
Cruise control, stumped.
Afternoon Folks,
Im driving a 2001 F250 SD 5.4 with 272,000KM
I did the in truck diganoise for the cruise and got 3 blinks at the end saying bad switch or circuit. I HAVE had the recall done 1 year ago. The fuse in the truck is fine, the new switch is working but cruise will not activate. I found two 2amp fuses in the harness (not blown but alittle corroded) that connects to the switch, I am about to put some new ones in but other then that I am stumped....anything I am missing?
Got a long haul and without cruise....I dont want to be without it.
thanks FTE
Im driving a 2001 F250 SD 5.4 with 272,000KM
I did the in truck diganoise for the cruise and got 3 blinks at the end saying bad switch or circuit. I HAVE had the recall done 1 year ago. The fuse in the truck is fine, the new switch is working but cruise will not activate. I found two 2amp fuses in the harness (not blown but alittle corroded) that connects to the switch, I am about to put some new ones in but other then that I am stumped....anything I am missing?
Got a long haul and without cruise....I dont want to be without it.
thanks FTE
