AC controls...
Thread Starter
|
Lead Driver
Joined: Aug 2009
Posts: 7,573
Likes: 250
From: Laquey, MO
AC controls...
I'm having problems with the vacuum controls on the '99. It acts like there is insufficient vacuum to operate the various doors and controls in the system. For example, if I stop at a light, the blend door will open up and the air will get warm until I step on it a bit and it snaps back and it's good and cold on the AC side again. I also have air coming from the floor heat vents when the switch is on vent.
It sounds, to me like the selector switch is acting up or I've got a bad connection somewhere and it is losing the vacuum. Any suggestions as to where to look first?
It sounds, to me like the selector switch is acting up or I've got a bad connection somewhere and it is losing the vacuum. Any suggestions as to where to look first?
Thread
Thread Starter
Forum
Replies
Last Post
