Need a oil pan!
Thread Starter
|
Senior User
Joined: Sep 2006
Posts: 285
Likes: 0
Need a oil pan!
Well i got my oil pan off and cleaned it up. I found out why it was leaking. There is a fricking hole in it!
So does anyone have a oil pan that they want to get rid of for a 77 f250 w/ 351m? The pump is in the front and it has a pickup tube (i think thats what its called) that goes to the rear. Would that be a front sump or rear?
So does anyone have a oil pan that they want to get rid of for a 77 f250 w/ 351m? The pump is in the front and it has a pickup tube (i think thats what its called) that goes to the rear. Would that be a front sump or rear?
Senior User
Joined: Feb 2009
Posts: 308
Likes: 0
From: Southern NM
Sounds like a rear sump configuration.If you are or know a competent welder,you can braze the hole in the oil pan shut.You didn't describe where the hole was located.Did you determine what caused the problem?
Thread Starter
|
Senior User
Joined: Sep 2006
Posts: 285
Likes: 0
It was from rust. It is a fairly small hole on the back of the pan in a corner.
