got the engine apart looking good
Thread Starter
|
Junior User
Joined: May 2010
Posts: 65
Likes: 0
got the engine apart looking good
area behind the water pump
piston and valves
ok heres my question when did they come out with 8 vane water pumps or were they always 8 I thought I saw some where that stock was 4 vanes
Hotshot
Joined: Nov 2000
Posts: 11,591
Likes: 14
From: Pflugerville, tx
If my wife goes out to the shop., there will be a puddle of something on the floor the next day.. we think the Mistress is marking territory..!
Sam
Fleet Owner
Joined: Jul 2004
Posts: 27,303
Likes: 1,062
From: NM
That looks very clean! The cooling passages especially. Any cracks at the center head bolt holes? (they don't matter so much, and are common)
Are you going to pull the valves out? As clean as it is, it may not be necessary, but if any are sticky now's the time!
Are you going to pull the valves out? As clean as it is, it may not be necessary, but if any are sticky now's the time!
Thread Starter
|
Junior User
Joined: May 2010
Posts: 65
Likes: 0
No cracks anywhere and I had a few valves sticking and they are not any more it a few turns and working with it but all the valves are cycling just like new the passages on the heads are a little more crusty so Iam going to have them hot clean and I should be good
