Those attending RRW
Thread Starter
|
Posting Guru
Joined: Feb 2005
Posts: 1,319
Likes: 1
From: Oregon
We will miss the family but still looking forward to seeing you.
Laughing Gas
Joined: Aug 2008
Posts: 823
Likes: 5
From: Dallas, Oregon
Bluescrew, I am not sure I can make it over there, but I can make sure the tester gets there. I will try to attend for at least a little while.
I don't do beer, but diet cola (with lime) works great!
Milleroutdoors, are you hosting? I will need directions.
I don't do beer, but diet cola (with lime) works great!
Milleroutdoors, are you hosting? I will need directions.
of American machinists
Joined: Oct 2004
Posts: 1,014
Likes: 0
From: NORTH IDAHO
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Post Fiend
Joined: Nov 2007
Posts: 9,549
Likes: 14
From: Payson, AZ
Jeff,
I just did my oil cooler so I will have some tips for you. If you have a bar or pipe clamp bring it. As you can see I used a bar clamp but it was just barely up to the task. Pipe clamp would be better with about a 30" piece of pipe. I don't know how Cody can press the ends on by hand, I couldn't. But if he can R&R an oil cooler in 45 minutes he's super human anyway.
I just did my oil cooler so I will have some tips for you. If you have a bar or pipe clamp bring it. As you can see I used a bar clamp but it was just barely up to the task. Pipe clamp would be better with about a 30" piece of pipe. I don't know how Cody can press the ends on by hand, I couldn't. But if he can R&R an oil cooler in 45 minutes he's super human anyway.
Postmaster
Joined: Jul 2004
Posts: 3,156
Likes: 0
From: Yuba City, CA.
Jeff,
I just did my oil cooler so I will have some tips for you. If you have a bar or pipe clamp bring it. As you can see I used a bar clamp but it was just barely up to the task. Pipe clamp would be better with about a 30" piece of pipe. I don't know how Cody can press the ends on by hand, I couldn't. But if he can R&R an oil cooler in 45 minutes he's super human anyway.
I just did my oil cooler so I will have some tips for you. If you have a bar or pipe clamp bring it. As you can see I used a bar clamp but it was just barely up to the task. Pipe clamp would be better with about a 30" piece of pipe. I don't know how Cody can press the ends on by hand, I couldn't. But if he can R&R an oil cooler in 45 minutes he's super human anyway.
Posting Guru
Joined: Jan 2007
Posts: 2,174
Likes: 1
From: Millersburg, OR
Special treat for those coming on Saturday to Riffraff West...
One Up Offroad will be there... and a few of their trucks. Might even do a little presentation showing some suspension travel
One Up Offroad will be there... and a few of their trucks. Might even do a little presentation showing some suspension travel
