Help!
Thread Starter
|
Mountain Pass
Joined: Aug 2006
Posts: 142
Likes: 0
Help!
I have a factory nav unit for my 06 F150. It will not run on the subwoofer for the audiophile stereo and i can't find anyone local who can program it. Anyone know of anywghere in south carolina that can program a factory nav unit??????
FTE Leadership Emeritus
Joined: Aug 2006
Posts: 47,280
Likes: 172
From: DELAWARE, The First State
Medic where did you get the nav unit and what year vehicle did it come from?
In most cases, what what I have read, a Ford dealer may have to program it to work with the options in your truck.
Do you have the nav disks for the unit?
In most cases, what what I have read, a Ford dealer may have to program it to work with the options in your truck.
Do you have the nav disks for the unit?
Thread Starter
|
Mountain Pass
Joined: Aug 2006
Posts: 142
Likes: 0
bought the nav unit on ebay...everything works (steering wheel controls, nav unit and yes i do have the disc), just when i do the 3-6 button check, it shows subwoofer disabled. tow large dealers here cannot figure out how to repprogram it to turn on the sub. it came from a late 2006-early 07 f150. any ideas?
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
That's going to be the case with most techs. They will be able to look up as built data from motorcraft's website, but not how to turn features on using HEX. Your best bet is to find a truck with your options, plus the radio you want. Then have Ford use that VIN to look up the as built data for the radio or cluster or whatever else would need the programming to up load into your truck.
