Intake removal question. HELP!
Thread Starter
|
New User
Joined: Apr 2010
Posts: 11
Likes: 0
Intake removal question. HELP!
Ok guys I am so close to getting the intake off but the darn wire harness is in the way. I am not sure of the best way to get this out of the way. I don't want to just go randomly unplugging everything. Can any of you who have done this before make any suggestions?
Elder User
Joined: May 2004
Posts: 812
Likes: 1
From: Northwest Florida
Hi, welcome to the forum. Somebody here may be able to help, but they'd need more info, like what engine for starters. You may also find better response by going to the furum here for your particular engine.
Good luck.
Good luck.
Posting Guru
Joined: Apr 2008
Posts: 2,424
Likes: 2
From: Albemarle, NC
Is the turbo off?? If not you will never get the bracket for the EGR cooler to clear the turbo. The wiring harness should be no problem. The harness is clipped to the top of the oil cooler kind of under the turbo, get it unhooked and that should help.
