Ball Joints... Done.
Thread Starter
|
Senior User
Joined: Mar 2010
Posts: 349
Likes: 0
From: Columbus, GA USA
Ball Joints... Done.
I did all four ball joints, repack the bearings and new seals too today. What a pain. But I did do the second side in less than half the time. What fun. Now to check and see if I need a steering box.
The one you see in my avatar is one that Rock auto sent me, right out of the box that what I see. Also both missing snap rings. Glad I checked them before I went to do them.
Back to buying local.
The one you see in my avatar is one that Rock auto sent me, right out of the box that what I see. Also both missing snap rings. Glad I checked them before I went to do them.
Back to buying local.
Senior User
Joined: Mar 2005
Posts: 172
Likes: 0
From: Spartanburg, SC
I had a popping sound in the front end and got a new set of ball joints under warranty. It didn't fix the problem so I guess I really didn't need them, but I got a front end alignment too, which was needed.
Thread Starter
|
Senior User
Joined: Mar 2010
Posts: 349
Likes: 0
From: Columbus, GA USA
Make me not wanna order from them anymore. I started checking Advance online and the run a lot of 15% off sales with free shipping >$75. I spent almost $400 between two vehicles a couple weeks ago with Advance.
Thread
Thread Starter
Forum
Replies
Last Post
WoodBoss
1994.5 - 1997 7.3L Power Stroke Diesel
24
Feb 26, 2016 09:30 AM
BillyBob69
1999 - 2003 7.3L Power Stroke Diesel
9
May 19, 2015 10:17 AM
